Verifying Sonicpoint Operation - SonicWALL SonicPoint ACe Getting Started Manual

Hide thumbs Also See for SonicPoint ACe:
Table of Contents

Advertisement

8 Select Enable Radio.
9 Select a Mode or use the default.
10 Under Wireless Security, select the Authentication 
Type for your wireless network. SonicWall recommends 
using WPA2 as the authentication type if all client 
devices support it. 
TIP: PSK uses a personal passphrase for authentication, 
EAP uses an Enterprise RADIUS server.
11 Select the Cipher Type. When using WPA and WPA2, 
SonicWall recommends AES for maximum security. 
NOTE: Older client devices might not support AES.
12 Fill in the fields specific to the authentication type that 
you selected. The remaining fields change depending 
on the selected authentication type.
13 Optionally, under ACL Enforcement, select Enable MAC 
Filter List to enforce Access Control by allowing or 
denying traffic from specific devices. Select a MAC 
address object group from the Allow List or Deny List to 
automatically allow or deny traffic to and from all 
devices with MAC addresses in the group. The Deny List 
is enforced before the Allow List.
Radio 0 / Radio1 Advanced tab settings
14 Click the Radio 0 Advanced tab, or the Radio 1 
Advanced tab.
The configuration is very similar for the Radio 0 
Advanced and Radio 1 Advanced tabs. For most 
advanced options, the default settings give optimum 
performance. For a full description of the fields on this 
tab, see the SonicOS Administration Guide.
15 Optionally select the Hide SSID in Beacon checkbox.
The SSID refers to the access point name that appears 
in clients' lists of available wireless connections. 
Hiding the SSID provides additional security because it 
requires the user to know the access point name before 
connecting.
16 When finished configuring all tabs, click OK.
Verifying SonicPoint operation
To verify that the SonicPoint is provisioned and operational, 
navigate to the SonicPoint > SonicPoints page in SonicOS. In 
the SonicPointNs table, the Status column displays the 
SonicPoint ACe status. It should say Operational.
SonicWall SonicPoint ACe Getting Started Guide
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apl26-0ae

Table of Contents