Configuring The Wlan Zone - SonicWALL SonicPoint ACe Getting Started Manual

Configuring the WLAN zone
To configure the WLAN zone in SonicOS
1 On the Network > Zones page in the WLAN row, click
the icon in the Configure column.
2 On the General tab, select the Allow Interface Trust
setting to automate the creation of Access Rules to
allow traffic to flow between the interfaces within the
zone, regardless of the interfaces to which the zone is
applied.
For example, if the WLAN zone has both the X2 and X3
interfaces assigned to it, selecting Allow Interface Trust
creates the necessary access rules to allow hosts on
these interfaces to communicate with each other.
3 Select the checkboxes to enable security services on
this zone. Minimally, you would enable Gateway Anti‐
Virus, IPS, and Anti‐Spyware. If your wireless clients
are all running SonicWall Client Anti‐Virus, select
Enable Client AV Enforcement Service.
4 On the Guest Services tab, optionally configure guest
Internet access. For information about Guest Services,
see the SonicOS Administration Guide.
5 On the Wireless tab, select Only allow traffic
generated by a SonicPoint/SonicPointN to allow only
traffic from SonicPoints to enter the WLAN zone
interfaces, providing maximum security.
6 When finished, click OK.
SonicWall SonicPoint ACe Getting Started Guide 23