Mounting Using Anchor Screws - SonicWALL SonicPoint ACe Getting Started Manual

Mounting using anchor screws
To mount the SonicPoint ACe using the anchor screws
1 On the mounting surface, mark the location to make
two screw holes. The marks should be horizontally
parallel to each other.
2 Screw the anchor screws into the ceiling tile or drywall
to their full depth.
3 Insert the screws into the anchors, and screw them in
deep enough to leave minimal space between the
screw heads and the wall surface.
4 Supporting the SonicPoint in your hands, securely fit
the underside slots of the SonicPoint onto the screw
heads.
20 SonicWall SonicPoint ACe Getting Started Guide