Table of Contents
Advertisement
SonicPoint ACe Appliance Checklist
SonicWall SonicPoint ACe Appliance
Antennas (6)
Mounting Kit (Ceiling Brackets, Anchor and Screw Kit)
Getting Started Guide
Power Adaptor*
*The included power cord is approved for use only in specific
countries or regions. Before using a power cord, verify that it is
rated and approved for use in your location.
Any items missing?
If any of the items corresponding to your product are missing
from the package, contact Technical Support at: https://
support.sonicwall.com/contact‐support
A listing of the most current support documents are available
online at: https://support.SonicWall.com/SonicWall‐
SonicPoint‐series/ace/release‐notes‐guides
10
SonicWall SonicPoint ACe Getting Started Guide
Deployment requirements
SonicOS firmware
• SonicWall SonicPoint ACe access points are centrally
managed by SonicWall network security appliances
running the following versions of SonicOS:
• SonicOS 5.9.1.6 or a higher 5.9 release
• SonicOS 6.2.5.1 or higher
Power source
• Use the supplied power adaptor or an 802.3at
compliant PoE injector or a PoE switch capable of
providing 25 watts of power to each SonicPoint ACe.
Internet connectivity
• An active Internet connection is required for your
firewall to download the latest SonicPoint firmware.
Gigabit Ethernet connectivity
• 802.11ac wireless hardware requires more bandwidth
than a single (or even dual) 10/100 Ethernet connection
can handle. Gigabit Ethernet connectivity between the
WLAN and the LAN is required to take full advantage of
802.11ac speed.
See Product safety and regulatory information on page 29.
Advertisement
Table of Contents
