Bosch DINION inteox 7100i IR User Manual page 16

16 en | Configuration
Company logo
To replace the company's logo in the top-right part of the window, enter the path to a suitable
image in this field. The image file must be stored on a web server.
Device logo
To replace the device name in the top-left part of the window, enter the path to a suitable
image in this field. The image file must be stored on a web server.
GIF or JPEG images can be used to replace the company and device logos. The image can be
stored on a web server (for example, http://www.myhostname.com/images/logo.gif). Ensure
that a connection to the web server is always available to display the image, since the image
files are not stored on the unit.
To reuse the original image, delete the entries in the fields Company logo and Device logo.
Show VCA metadata
When video content analysis (VCA) is activated, additional information is displayed in the live
video stream. With the MOTION+ analysis type, for example, the sensor fields in which motion
is recorded are marked with yellow rectangles.
Using Intelligent Video Analytics, the outlines of detected objects are displayed in these
colors:
–
–
–
Show VCA trajectories
For devices with Essential Video Analytics or Intelligent Video Analytics, the trajectories
(motion lines of objects) from the video content analysis are shown in the live video image if a
corresponding analysis type is activated. The trajectory is shown as a green line that follows
the object's base point.
Show overlay icons
Select this check box to show overlay icons on the live video image.
Show VCA items
Select this checkbox to show VCA items on the live video image.
Shows alarm fields, lines and routes configured for the video analytics in the following colors:
–
–
Show 'Dashboard'
Select this checkbox to enable the Dashboard in the application bar.
Secure cookies
Select this checkbox to secure the cookies sent through the camera.
Notice!
i
If cookies are secured, authentication forwarding to MPEG ActiveX and the Video Security
App is prohibited.
Video player
2021-08 | V01 | DOC
Red: Objects that generate an alarm event under the current settings appear on the
camera image inside a red outline.
Orange: An object that triggered an alarm event but does not generate another one
appears inside an orange outline (example: object has crossed a line). During forensic
search, an object that triggers an alarm event has an orange outline from the beginning.
Yellow: Objects that are detected as moving but do not generate an alarm event under
the current settings appear inside a yellow outline.
Green: Fields, lines and routes used in a task are displayed in green. They can be edited
but not deleted.
Red: Fields, lines and routes currently in alarm mode are displayed in red.
DINION inteox 7100i IR | FLEXIDOME inteox 7100i
User manual
Bosch Security Systems B.V.