Table of Contents
Advertisement
AUTODOME IP starlight 5000i
Multicast packet TTL
You can enter a value to specify how long the multicast data packets are active on the
network. This value must be greater than one if multicast is to be run via a router.
10.7
Image Posting
Image size
Select the appropriate image size: Small, Medium, Large, 720p, 1080p, Best possible.
File name
You can select how file names will be created for the individual images that are transmitted.
–
–
–
VCA overlays
To include VCA overlays in the email, select this check box.
Posting interval
Enter the interval in seconds at which the images will be sent to an FTP server. Enter 0 (zero)
if you do not want any images to be sent.
The following field may or may not appear, depending on your camera:
Post JPEG from camera
Click the checkbox to select the cameras from which JPEG images are sent. An enabled video
input is indicated by a check mark.
Target
Select the target—the name of the account on the server—to which to save images.
When face recognition is available, selected images of the face can be sent to a target
account.
Enable
Check the box to enable best face posting.
File format
Select the type of image to be sent.
Target
Select the target account for best face posting.
Timeout
Fill in the timeout in seconds. Leave at 0 for no timeout.
Maximum image width [px]
Fill in the maximum image width in pixels. Leave at 0 for automatic width selection.
10.8
Accounts
Four separate accounts can be defined for posting and recording export.
Type
Select either FTP or Dropbox for the account type.
Before using a Dropbox account ensure that the time settings of the device have been
correctly synchronized.
Bosch Security Systems
Overwrite The same file name is always used and any existing file will be overwritten with
the current file.
Increment A number from 000 to 255 is added to the file name and automatically
incremented by 1. When it reaches 255 it starts again from 000.
Date/time suffix The date and time are automatically added to the file name. When
setting this parameter, ensure that the unit's date and time are always correctly set.
Example: the file snap011005_114530.jpg was stored on October 1, 2005 at 11:45 and
30 seconds.
User Manual
Network | en
59
2018.11 | 1.1 |
Advertisement
Table of Contents
