Speed Dialing; Abbreviated Dialing - Sanyo Juno User Manual

Speed Dialing

You can store up to 98 numbers in your phone's speed
dial memory to make contacting friends and family
easier.
You must assign a speed dial number to the existing
phone number beforehand. See "Assigning Speed Dial
Numbers" on page 61.
To use speed dial for locations 2-9:
From standby mode, press and hold the
appropriate key for approximately two seconds.
To use speed dial for locations 10-99:
From standby mode, press appropriate keys, and
then press .
The display confirms that the number has been dialed
when it shows "Connecting..."
Note Speed dialing may not be available when you are
roaming; when you are roaming off the Nationwide
Sprint Network, you must always dial using eleven
digits (1+ area code + number).
26 2A. Phone Basics

Abbreviated Dialing

Abbreviated Dialing is similar to speed dialing. You can
use either of the following abbreviated dialing features.
– Retrieve any number saved in your
Contacts Match
Contacts by entering only the last three to six digits of
the number.
Prepend – Prepend the first five or six digits (for
example, the area code and prefix) to any four or five
digits you enter.
To activate the Contacts Match feature:
1.
Press
> Settings > More... > Call Setup
2. Select
Contacts Match > On
To activate the Prepend feature:
1.
Press > Settings > More... > Call Setup >
Abbreviated Dialing .
2.
Select
Prepend > On
3.
Enter a five- or six-digit number and press
.
.
.
.