Displaying Contacts Details; Adding A New Contacts Entry - Sanyo Juno User Manual

Displaying Contacts Details

1. From standby mode, press
softkey).
2.
Highlight an entry for which you want to see the
details and press .
3.
Highlight any data field and press
onscreen menu options for the information
displayed.
Note If you select a group in step 2, entries or phone
numbers belonging to the group are displayed.
(right
CONTACTS
. You will see

Adding a New Contacts Entry

1. From standby mode, press
softkey)
> Add New > New Contact
2.
Enter a name for the new entry and press the
navigation key down.
3.
Enter the phone number for the entry and press
4.
Highlight a number type for the entry (
, , , or
Work Pager Fax Other
5.
Add other information (email address, URL, or street
address, etc.).
6.
Press (left softkey).
DONE
After you have saved the number, the new Contacts
entry is displayed.
Tip ICE– In Case of Emergency
To make it easier for emergency personnel to
identify important contacts, you can list your local
emergency contacts under "ICE"in your phone's
Contacts list. For example, if your mother is your
primary emergency contact, list her as "ICE–Mom"in
your Contacts list. To list more than one emergency
contact, use "ICE1–___,""ICE2–___,"etc.
(right
CONTACTS
.
Mobile , Home
) and press .
2D. Contacts
.
,
57