Accessing Sms Voice Messages - Sanyo Juno User Manual

3.
Start recording after the beep. (You can record up to
two minutes.)
4.
To finish recording, press
5.
Press (left softkey) to send the voice message.
SEND
Note You may be prompted for an ID the first time you
send an SMS voice message. Follow the voice or
onscreen instructions to send the message.

Accessing SMS Voice Messages

When you receive a voice message, your phone will
display a notification message. Use your softkeys to
access and play the voice message.
– or –
1.
From standby mode, press
.
Voice SMS
2. Highlight a message and press
display the message options, press
softkey].)
(left softkey).
DONE
(left softkey)
MESSAGES >
to play. (To
[right
OPTIONS
To reply to an SMS voice message:
1.
While the message is displayed, press
(left softkey).
Tip Press OPTIONS (right softkey) > Reply with to reply
with a picture message or a text message.
2.
Record your reply, and then press
softkey) > SEND (left softkey).
– or –
1.
From standby mode, press
Voice SMS .
2.
Highlight a message you want to reply and press
(left softkey).
REPLY
3.
Record your reply, and then press
softkey) (left softkey).
> SEND
3A. Sprint Service: The Basics
REPLY
(left
DONE
(left softkey)
MESSAGES >
DONE (left
107