Dialing From The Contacts List; Plus Code Dialing - Sanyo Juno User Manual

Note You can have multiple pauses in a phone number
and combine two-second and hard pauses.
To dial or save phone numbers with pauses:
1.
Enter all or part of a number.
2. Press (right softkey)
OPTIONS
2-Sec. Pause.
3.
Enter additional numbers.
4. Press (right softkey)
OPTIONS
number in your Contacts.
– or –
Press to dial the number.
5.
Press to send the additional number if Hard
Pause was selected.
or
> Hard Pause
to save the
> Save

Dialing From the Contacts List

1. From standby mode, press
softkey).
2.
Highlight the entry you want to call.
3. Press to dial the entry's default phone number.
– or –
Press the navigation key left or right to show another
number for the entry and press
Plus (+)Code Dialing
When placing international calls, use Plus Code Dialing
to automatically enter the international access code for
your location. (This feature is subject to network
availability.)
1.
Press to display "+" on your phone screen.
2. Dial the country code and phone number you're
calling, and press
international dialing will automatically be dialed,
followed by the country code and phone number.
(right
CONTACTS
.
. The access code for
2A. Phone Basics 25