Cooper Lighting MEL25MWW2SXSWBK Specification Sheet

D E C O R AT I V E
MEL/CEL
D E C O R AT I V E A R E A C O L L E C T I O N
STREETWORKS ™
T O P O R D E R I N G I N F O R M AT I O N
Cast aluminum housing maintains
S A M P L E N U M B E R
sidewall thickness and attaches to
mounting arm hub with four (4)
PRODUCT
stainless steel fasteners.
FAMILY 1
MEL=Modern
M I D S E C T I O N
Epic Large
Milky white acrylic lens utilizes
CEL=Classic
continuous silicone gaskets to seal
Epic Large
lens to top casting and shade.
Optional colored luminous rings
are available.
S H A D E S
Heavy gauge precision spun
aluminum shades offer superior
surface finish and consistency in
form.
D O O R F R A M E A S S E M B LY
Die-cast aluminum 1/8" thick door
O P T I O N S + A C C E S S O R I E S
and doorframe seal to underside of
shade with a thick wall continuous
OPTIONS (add as suffix)
silicone gasket.
1=Single Fuse
2=Double Fuse
O P T I C A L S Y S T E M S
C=Emergency Quartz—Separate Circuit
Choice of five (5) high efficiency
D=Dual Fluorescent Switching Control
segmented optical systems
E=Emergency Quartz with Time Delay
constructed of premium 95% F=Frosted Flat Glass
H=House Side Shield
reflective anodized aluminum sheet.
L=Lamp Included
Q=Quartz Standby
E L E C T R I C A L T R AY
R=Frosted Sag Glass
Ballast and related electrical
S=Sag Glass
componentry are mounted to a
PMT=Post Mount Tenon
reinforced one piece tray with
PM-PCR=NEMA Type Photocontrol Receptacle
integral handle. Quick disconnect
(Post Mount Only)
wiring plugs allow easy tray
NG=No Glow Luminous Mid Section
removal during routine
maintenance.
ACCESSORIES (order separately/replace XX with color suffix)
MEL Modern Epic Large Arms
F I N I S H
[see page 14-15 for details on arm accessories]
Housing finished in a 5 stage SA6005-XX=MEL Bishop Single Pole Mount Arm
SA6006-XX=MEL Bishop Single Pole Mount Arm with
premium TGIC polyester powder
coat paint, 2.5 mil nominal
SA6007-XX=MEL Bishop Twin Pole Mount Arm
thickness for superior protection
SA6008-XX=MEL Bishop Twin Pole Mount Arm with
against fade and wear. Standard
colors include black, bronze, grey,
SA6009-XX=MEL Traditional Single Pole Mount Arm
white, dark platinum, graphite
SA6010-XX=MEL Traditional Single Pole Mount Arm
metallic, and hartford green.
SA6011-XX=MEL Traditional Single Pole Mount Arm
RAL and custom color matches
available. Consult your Streetworks
Representative.
E P A :
Effective Projective Area:
NOTE: 1 Arms not included. Order Separately. See accessories. 2 All HID lamps are mogul-base. 3 320 and 350W Pulse Start Metal Halide only. 4 400W MH requires reduced envelope ED28 Lamp. 5 Electrodeless Fluorescent QL
Flat Lens 1.55
lamp only. Available in vertically lamped optical systems and Type 3S and 5S distribution only. 120V only. 6 Refer to technical section for lamp/ballast/voltage compatibility. 7 Vertical lamp option only. Maximum wattage of
Sag Lens 1.75
250W HID. 8 SLE only available with Solid Mid selection or with NG option. 9 Custom and RAL color matching available upon request. Consult your Cooper Lighting Representative for more information. 10 Quartz options
not available with SL optic or vertical lamped optical systems. 11 Dual switching requires dual 57W or dual 70W Compact Fluorescent lamps, and allows independent switching control of each lamp through use of two (2)
S H I P P I N G D ATA
electronic ballasts. Allows 50% power reduction when dual ballasts are independently wired and controlled. 12 House side shield available on horizontally lamped 2S, 3S, and 4S optical systems only. 13 NG option retains
Approximate Net Weight:
daytime appeal of window, louvered, slot, solid rings, or luminous rings mid section styles, but does not allow light into the upper chamber of the housing. Mid section will not glow at night, maintaining the cutoff
50 lbs. (23 kgs.)
control associated with the standard solid mid section. 14 Requires use of 4" O.D. round straight pole. 15 Finials compatible with Traditional Arms only. 16 Not compatible with finials.
12 S T R E E T W O R K S O u t d o o r L i g h t i n g S o l u t i o n s
EPIC LARGE
NOTE: In all flat glass and solid mid sections
configurations only.
IP65 RATED
: M E L 2 5 M W W 2 S X S W B K
LAMP LAMP TYPE 6 BALLAST TYPE
M=Metal C=CWI
WATTAGE
Halide H=Reac./HPF
HID 2
S=High K=10KV CWA
15=150W
Pressure N=Hi. Reac./NPF
17=175W
Sodium P=Hi. Reac./HPF
25=250W
Q=Induction R=Reac./NPF
32=320W 3
W=CWA
35=350W 3
I=Induction
40=400W 4
Electrodeless
Fluorescent 5
55=55W
85=85W
[ M u s t b e l i s t e d i n t h e o r d e r s h o w n a n d s e p a r a t e d b y a d a s h ]
10
11
10
12
10
13
Cross Rod
Cross Rods
with Rounded Upper Bar
with Rounded Lower Bar 14
6 VOLTAGE 6 DISTRIBUTION
2=120V
MA=Milk White
0=208V
Acrylic
4=240V Jar 7
7=277V 2S=Type II
8=480V
3S=Type III
9=347V 4S=Type IV
K=120/277V 5S=Type V
wired 120V
SL=Spill Light
L=277/120V Eliminator
wired 277V
N=Multi-Tap
Wired 277V
W=Multi-Tap
Wired 120V
SA6012-XX=MEL Traditional Single Pole Mount Arm
with 45° Upper Bar
SA6013-XX=MEL Traditional Single Pole Mount Arm
with 45° Lower Bar 14
SA6014-XX=MEL Traditional Single Pole Mount Arm
with 45° Upper Strap
SA6016-XX=MEL Traditional Twin Pole Mount Arm
SA6017-XX=MEL Traditional Twin Pole Mount Arm
with Rounded Upper Bars
SA6018-XX=MEL Traditional Twin Pole Mount Arm
with Rounded Lower Bars 14
SA6019-XX=MEL Traditional Twin Pole Mount Arm
with 45° Upper Bars
SA6020-XX=MEL Traditional Twin Pole Mount Arm
with 45° Lower Bars 14
SA6021-XX=MEL Traditional Twin Pole Mount Arm
with 45° Upper Straps
SA6022-XX=MEL Tenon Adapter for 2 3/8" O.D. Horizontal
Tenon
CEL Modern Epic Large Arms
[see page 14-15 for details on arm accessories]
SA6054-XX=CEL Bishop Single Pole Mount Arm
SA6055-XX=CEL Bishop Single Pole Mount Arm
with Cross Rod
SA6056-XX=CEL Bishop Twin Pole Mount Arm
SA6057-XX=CEL Bishop Twin Pole Mount Arm
with Cross Rods
SA6058-XX=CEL Traditional Single Pole Mount Arm
SA6059-XX=CEL Traditional Single Pole Mount Arm
with Rounded Upper Bar
Maximum Width 31 13/16" [808mm]
NOTE: See MEL/CEL configurations on opposite page
for more detailed information.
MID SECTION SHADE TYPE
COLOR
SW=Straight
TYPE
(add as suffix/
Wide
X=Solid
must specify)
BL=Bell
(Standard)
AP=Grey
FL=Flute
1=Window
BK=Black
2=Louvered
BZ=Bronze
3=Slot
DP=Dark
4=Solid Rings
5=Luminous
GM=Graphite
8
Rings
Optional Mid
GN=Hartford
Section Type
6=Luminous Rings—Red
WH=White
7=Luminous Rings—Bright Blue
8=Luminous Rings—Deep Green
9=Luminous Rings—Warm Orange
SA6060-XX=CEL Traditional Single Pole Mount Arm
with Rounded Lower Bar
SA6061-XX=CEL Traditional Single Pole Mount Arm
with 45° Upper Bar
SA6062-XX=CEL Traditional Single Pole Mount Arm
with 45° Lower Bar
SA6063-XX=CEL Traditional Single Pole Mount Arm
with 45° Upper Strap
SA6065-XX=CEL Traditional Twin Pole Mount Arm
SA6066-XX=CEL Traditional Twin Pole Mount Arm
with Rounded Upper Bars
SA6067-XX=CEL Traditional Twin Pole Mount Arm
with Rounded Lower Bars
SA6068-XX=CEL Traditional Twin Pole Mount Arm
with 45° Upper Bars
SA6069-XX=CEL Traditional Twin Pole Mount Arm
with 45° Lower Bars
SA6070-XX=CEL Traditional Twin Pole Mount Arm
with 45° Upper Straps
SA6071-XX=CEL Tenon Adapter for 2 3/8" O.D. Horizontal
Tenon
OA/RA1016=NEMA Photocontrol—Multi-Tap
OA/RA1027=NEMA Photocontrol—480V
OA/RA1201=NEMA Photocontrol—Multi-Tap (347V)
ACCESSORY OPTIONS (add as suffix to accessory)
M=Modern Finial 15
A=Architectural Finial 15
N=Nostalgic Finial 15
4=NEMA Twistlock Photocontrol Receptacle
55-400W
MH/HPS/QL
Maximum
Height
26 1/2"
[673mm]
OPTIONS +
ACCESSORIES
9
(See Below)
Platinum
Metallic
Green
14
14
14
14
16
C o o p e r L i g h t i n g