Moxa Technologies AWK-4131 User Manual page 32

AWK-4131
WPA/WPA2-Enterprise (for AP/Master mode)
By setting WPA type to Enterprise, you can use EAP (Extensible Authentication Protocol), a framework
authentication protocol used by 802.1X to provide network authentication. In these Enterprise-level security
modes, a back-end RADIUS (Remote Authentication Dial-In User Service) server is needed if IEEE 802.1X
functionality is enabled in WPA /WPA2. The IEEE 802.1X protocol also offers the possibility of carrying out an
efficient connection authentication on a large-scale network. It is not necessary to exchange keys or
passphrases.
WPA type
Setting
Personal
Enterprise
Encryption method
Setting
TKIP**
AES
Mixed*
** This option is only available with 802.11a/b/g standard
* This option is available for legacy mode in AP/Master only, and does not support AES-enabled clients.
Primary/Secondary RADIUS server IP
Setting
The IP address of
RADIUS server
Primary/Secondary RADIUS port
Setting
Port number
Primary/ Secondary RADIUS shared key
Setting
Max. of 31 characters
Key renewal
Setting
60 to 86400 seconds
(1 minute to 1 year)
Description
Provides Pre-Shared Key-enabled WPA and WPA2
Provides enterprise-level security for WPA and WPA2
Description
Temporal Key Integrity Protocol is enabled
Advance Encryption System is enabled
Provides TKIP broadcast key and TKIP+AES unicast key for
some legacy AP clients. This option is rarely used.
Description
Specifies the delegated RADIUS server for EAP
Description
Specifies the port number of the delegated RADIUS server
Description
The secret key shared between AP and RADIUS server
Description
Specifies the time period of group key renewal
3-13
Web Console Configuration
Factory Default
Personal
Factory Default
AES
Factory Default
None
Factory Default
1812
Factory Default
None
Factory Default
3600 (seconds)