Table of Contents
Advertisement
Replacing Exterior Bulbs
FRONT TURN SIGNAL LAMP
See the following steps to replace:
1.
Open the hood.
2.
Twist the front turn signal lamp socket assembly
counterclockwise, and then remove the front turn
signal lamp assembly from the lamp housing.
Front Turn Signal Lamp Socket
3.
Pull the bulb out of the socket and insert the
replacement bulb.
4.
Install the front turn signal lamp socket assembly into
the housing, and rotate the front turn signal lamp
socket clockwise to lock it in place.
FRONT AND REAR SIDE MARKER LAMPS
See the following steps to replace:
1.
Remove the three fasteners from the inner wheel
liner and carefully peel back liner for access.
Inner Wheel Liner Fasteners
2.
Firmly grab the front side marker lamp socket and
rotate a quarter turn counterclockwise to remove it
from the lamp assembly.
SERVICING AND MAINTENANCE
Front Side Marker Lamp Bulb Removal
3.
Remove bulb from the front side marker lamp socket
and replace with a new bulb.
4.
Install front side marker lamp socket in lamp
assembly and rotate a quarter turn clockwise to lock
into place.
5.
Position the inner wheel liner in place and install the
three fasteners.
223
8
Advertisement
Table of Contents
