Table of Contents
Advertisement
208
SERVICING AND MAINTENANCE
2.
To disengage the wiper blade from the wiper arm, flip
up the release tab on the wiper blade and while
holding the wiper arm with one hand, slide the wiper
blade down towards the base of the wiper arm.
Wiper Blade With Release Tab In Unlocked Position
1 — Wiper Blade
2 — Release Tab
3 — Wiper Arm
3.
With the wiper blade disengaged, remove the wiper
blade from the wiper arm by holding the wiper arm
with one hand and separating the wiper blade from
the wiper arm with the other hand (move the wiper
blade toward the right side of the vehicle to separate
the wiper blade from the wiper arm).
Wiper Blade Removed From Wiper Arm
1 — Wiper Blade
2 — Release Tab
3 — Wiper Arm
4.
Gently lower the wiper arm onto the glass.
Installing The Front Wipers
1.
Lift the wiper arm off of the glass, until the wiper arm
is in the full up position.
2.
Position the wiper blade near the hook on the tip of
the wiper arm with the wiper release tab open and the
blade side of the wiper facing up and away from the
windshield.
3.
Insert the hook on the tip of the arm through the
opening in the wiper blade under the release tab.
4.
Slide the wiper blade up into the hook on the wiper
arm and rotate the wiper blade until it is flush against
the wiper arm. Fold down the latch release tab and
snap it into its locked position. Latch engagement will
be accompanied by an audible click.
5.
Gently lower the wiper blade onto the glass.
Rear Wiper Blade Removal/Installation
1.
Lift the rear wiper arm pivot cap away from the glass
to allow the rear wiper blade to be raised off of the
glass.
NOTE:
The rear wiper arm cannot be fully raised off the glass
unless the wiper arm pivot cap is unsnapped first.
Attempting to fully raise the rear wiper arm without
unsnapping the wiper arm pivot cap may damage the
vehicle.
Wiper Pivot Cap In Unlocked Position
1 — Wiper Arm Pivot Cap
2 — Wiper Arm
Advertisement
Table of Contents
