Table of Contents
Advertisement
When smoke or strange odors are emitted
from the radio, turn off the power and discon-
nect the power cord from the socket.
Keep the power plug pins and the surround-
ing areas clean at all time.
Never cut the fuse holder off of the DC power
cord.
Use only the specified type fuses.
When connecting a DC power cord, be certain
the positive and negative polarities are correct.
Do not use DC power cords other than the
one enclosed or specified.
Do not place the transceiver on an unsteady
or sloping surface, or in a location with ex-
treme vibration.
Stay as far away from the antenna as possible
during transmission.
Do not wipe the case using thinner and ben-
zene etc.
case.
Keep this product out of the reach of children.
Do not put heavy objects on top of the power
cord and connection cables.
6
TRIAL MODE − Click here for more information
Do not bend, twist, pull, heat and modify the
power cord and connection cables in an un-
reasonable manner.
-
Do not pull the cable when plugging and unplug-
ging the power cord and connection cables.
Do not use the device when the power cord
and connection cables are damaged, or when
the DC power connector cannot be plugged
in tightly.
-
Contact Yaesu Amateur Customer Support or
Follow the instructions provided when installing
items sold separately and replacing the fuse.
Use only the provided or specified screws.
-
CAUTION
Do not use any products other than the speci-
fied options and accessories.
For safety reasons, switch off the power and
pull out the DC power cord connected to the
DC power connector when the device is not
going to be used for a long period of time.
Do not throw the transceiver, or subject it to
strong impact forces.
Keep magnetic cards and videotapes away
from the transceiver.
The data recorded on cash cards or videotapes
Do not stand on top of the product, and do not
place heavy objects on top or insert objects
inside it.
-
-
-
Advertisement
Table of Contents
