Table of Contents
Advertisement
Setting Speaker Level
You can set the balance and level of speakers
Remote Control
1
2
3
To Exit Setup Mode
Wait for about 5 seconds or press SPK LEVEL button of remote control to select SPK
•
LEVEL OFF.
25
√
Press SPK LEVEL button to select the speaker you want.
Each time you press this button, F.L
CEN
F.R
S.R
•
SPK LEVEL OFF will be selected in turn.
Press ...† button to set the speaker level you want.
You can adjust it from -10 to +10dB by 1 step.
•
The sound gets smaller at -10dB and louder at +10dB.
Default setting value is 00dB.
Repeat the steps 1 and 2 to set it.
S.B
S.L
S.W
Setting Speaker Level
F.L (Front-Left) : -10 ~ +10dB
•
CEN (Center) : -10 ~ +10dB
•
F.R (Front-Right) : -10 ~ +10dB
•
S.R (Rear-Right) : -10 ~ +10dB
•
•
S.B (Rear Center): -10 ~ +10dB
S.L (Rear-Left): -10 ~ +10dB
•
S.W (Subwoofer): -10 ~ +10dB
•
Remote Control
1
Press and hold SURROUND for about 5 seconds.
•
"SETUP MODE" appears on the display and enters into Setup Mode.
2
Press INPUT button 7 times.
"LEVEL SETUP" appears on the display.
•
3
Press SURROUND button.
Each time you press this button, F.L
CEN
F.R
•
will be selected in turn.
4
Press SELECT(
) button to set to the speaker level you
,
want.
You can adjust it from -10 to +10dB by 1 step.
•
•
The sound gets smaller at -10dB and louder at +10dB.
•
Default setting value is 00dB
5
Repeat the steps 3 and 4 to set it.
To Exit Setup Mode
•
Wait for about 5 seconds or turn VOLUME CONTROL of the main unit. "SETUP
MODE OFF" appears on the display and exits Setup Menu.
S.R
S.B
S.L
S.W
26
Advertisement
Table of Contents
