Dolby Pro Logic Llx Effect - Samsung AV-R700 Instruction Manual

Digital surround av receiver system
Hide thumbs Also See for AV-R700:
Table of Contents

Advertisement

Dolby Pro Logic llx Effect

This function works only in Dolby PRO LOGIC IIX MUSIC Mode.
REMOTE CONTROL
1
2
3
4
To Exit Setup Mode
Wait for about 5 seconds .
29
Press
MODE button to select 'MUSIC' Mode.
Press
EFFECT button.
Each time you press this button, C-WIDTH
DIMENSION
selected in turn.
Press ...† button to select Dolby Pro Logic IIx effect you want.
C-WIDTH: You can set from 0 to 7.
DIMENSION: You can set from 0 to 7.
PANORAMA: You can Set it ON or OFF.
Repeat the steps 2 and 3 to set the Dolby Pro Logic IIx effect.
PANORAMA will be
Dolby Pro Logic llx Effect
C-WIDTH : Sound will be output from center speaker only. Front-left
and front-right speaker give sound field effect only. In addition, sounds
are output in different volumes from Front-Left, Front-Right Speaker and
Center Speaker.
DIMENSION : Adjust the sound balance if the sound is unbalanced to
front or rear speaker.
PANORAMA : Give the effect expanding and covering the sound from
front-left and front-right Speaker to both walls.
MAIN UNIT
1
Press and hold SURROUND button for about 5 seconds.
"SETUP MODE" appears on the display and enters into Setup Mode.
INPUT button 8 times.
2
"DPL ll x MODE"appears on the display.
Press SURROUND button.
3
Each time you press this button, DIMENSION
PANORAMA
be selected in turn.
Press SELECT(
) button to select Dolby Pro Logic llx
,
4
effect you want.
Repeat the steps 3 and 4 to set Dolby Pro Logic llx effect.
5
To Exit Setup Mode
Wait for about 5 seconds or turn VOLUME CONTROL of the main unit. "SETUP
MODE OFF" appears on the display and exits Setup Mode.
Press
C-WIDTH will
30

Advertisement

Table of Contents
loading

Table of Contents