Table of Contents
Advertisement
Setting the Speaker
REMOTE CONTROL
1
2
3
To Exit Setup Mode
Wait for about 5 seconds or press the SPEAKER DISTANCE button of remote control
•
to select DISTANCE OFF.
19
√
Press the SPEAKER DISTANCE button to select the
speaker you want.
Each time you press this button, F.L
CEN
F.R
S.R
•
S.W
DISTANCE OFF will be selected in turn.
Press ...† button to set the speaker distance.
•
For F.L, CEN, F.R, S.W Speaker, you can set the distance from the speaker to
listening position between 0.0~1.5m at the interval of 0.3m.
•
For S. R, S.B, S.L Speaker, you can set the distance from the speaker to
listening position between 0.0~4.5m at the interval of 0.3m.
Repeat the steps 1 and 2 to set the speaker distance.
If the listening position is beyond the range of speaker
•
distance setup when you place the speaker, set the
speaker distance to the maximum.
S.B
S.L
Setting Speaker Distance
Set the distance from the speaker to listening position at the interval of 0.3m.
F.L (Front-Left) : 0ft 0.0m ~ 5ft 1.5m
•
CEN (Center) : 0ft 0.0m ~ 5ft 1.5m
•
•
F.R (Front-Right) : 0ft 0.0m ~ 5ft 1.5m
•
S.R (Rear-Right) : 0ft 0.0m ~ 15ft 4.5m
•
S.B (Rear Center): 0ft 0.0m ~ 15ft 4.5m
•
S.L (Rear-Left): 0ft 0.0m ~ 15ft 4.5m
MAIN UNIT
1
Press and hold SURROUND button for about 5 seconds
"SETUP MODE" appears on the display and enters into Setup Mode.
•
2
Press INPUT button 2 times.
"DISTANCE SETUP" appears on the display.
•
3
Press SURROUND button to select the speaker you want.
Each time you press this button, F.L
CEN
F.R
•
will be selected in turn.
4
Press SELECT(
) button to set the speaker distance.
,
For F.L, CEN, F.R, S.W Speaker, you can set the distance from the speaker to
•
listening position between 0.0~1.5m at the interval of 0.3m.
For S.R, S.B, S.L Speaker, you can set the distance from the speaker to listening
•
position between 0.0~4.5m at the interval of 0.3m.
5
Repeat the steps 3 and 4 to set the speaker distance.
To Exit Setup Mode
•
Wait for about 5 seconds or turn the VOLUME CONTROL of the main unit. "SETUP MODE
OFF" appears on the display and exit Setup Mode.
S.R
S.B
S.L
S.W
20
Advertisement
Table of Contents
