Table of Contents
Advertisement
Section 4 - Maintenance
•
Remove the propeller at least every 60 days and lubricate the propeller shaft.
•
Do not use lubricants containing graphite on or near the aluminum in saltwater.
•
Do not paint trim tabs or the mounting surface.
Flushing the Seawater System—Sterndrive Models
Flushing the Power Package—Bravo Models
The boat can be equipped with a combination of any of three different types of water pickups: through‑the‑hull,
through‑the‑transom, and through‑the‑sterndrive. The flushing procedures for these systems are separated into two categories:
sterndrive water pickups and alternative water pickups.
IMPORTANT: Flushing the power package with the boat and sterndrive in the water is less effective. Flushing the power
package is most effective when performed with the boat and sterndrive out of the water, such as on a boat lift or trailer.
Flushing Attachments
b
b
c
Flushing Device
Page 76
a
21515
a
21514
Attaches to the water intakes; provides a fresh water connection when flushing the cooling system or
operating the engine.
9192
Flushing attachments for side water pickup
a -
Flushing device
b -
Hose attachment
Flushing attachments for dual water pickup
a -
Flushing device
b -
Hose attachment
c -
Dual water pickup flush gearcase seal kit
91‑44357Q 2
90-8M0128976
MAY 2017
eng
Advertisement
Table of Contents
