Related Manuals for BWI Eagle 36-HH-1
Summary of Contents for BWI Eagle 36-HH-1
- Page 1 AIR-EAGLE SR PLUS 36-HH-1 2.4 GHz RF Transmitter Document Date: 7/20/2022 Product Rev: 12...
-
Page 2: Warranty Statement
36-HH-1 WARRANTY STATEMENT BWI Eagle Inc. warrants the Air-Eagle Remote Control System, if properly used and installed, will be free from defects in material and workmanship for a period of 1 year after date of purchase. Said warranty to include the repair or replacement of defective equipment. This warranty does not cover damage due to external causes, including accident, problems with electrical power, usage not in accordance with product instructions, misuse, neglect, alteration, repair, improper installation, or improper testing. -
Page 3: Controls And Indicators
36-HH-1 INTRODUCTION The Air-Eagle SR PLUS TX is a handheld R.F. transmitter capable of sending a single digital command to an Air-Eagle SR Receiver located up to 600 feet away. Any number of transmitters and receivers can be combined to create a medium-range radio frequency system that operates hazardous or hard-to-reach equipment from safe, convenient locations. -
Page 4: Frequency Programming
36-HH-1 FREQUENCY PROGRAMMING Please read through these instructions completely before beginning programming procedure! All transmitters are set to Frequency 1 by default. The frequency can be changed at any time by following the procedure below. Once changed, we recommend labeling the transmitter with the selected frequency number. -
Page 5: Relay Programming
36-HH-1 RELAY PROGRAMMING Please read through these instructions completely before beginning programming procedure! All transmitters are set to operate Relay 1 in the remote receiver by default. The relay to be operated can be changed at any time by following the procedure below. Once changed, we recommend labeling the transmitter with the selected relay number. - Page 6 36-HH-1 POWER LEVEL PROGRAMMING Please read through these instructions completely before beginning programming procedure! All transmitters are set to Power Level 4 (max range 600 ft) default. The power level can be changed at any time by following the procedure below. Power level settings will not be changed during normal battery replacement.
-
Page 7: Specifications
36-HH-1 APPROVALS United States (FCC) MCQ-XBEE3 Canada (IC) 1846A-XBEE3 Europe (CE) ETSI Australia Brazil ANATEL 06329-18-01209 SPECIFICATIONS Durable Sealed Membrane Keypad – Eliminates Dust, Dirt and Keypad Moisture Failures Enclosure ABS UL94 HB Enclosure with ring is rated IP54 *Not... - Page 8 36-HH-1 DIMENSIONS...