BWI Eagle AIR-EAGLE SR PLUS Manual
2.4 ghz rf receiver
Hide thumbs
Also See for AIR-EAGLE SR PLUS:
- Manual (10 pages) ,
- Quick start manual (7 pages) ,
- Product information bulletin (5 pages)
Related Manuals for BWI Eagle AIR-EAGLE SR PLUS
Summary of Contents for BWI Eagle AIR-EAGLE SR PLUS
- Page 1 AIR-EAGLE SR PLUS 38-2000-AC 2.4 GHz RF Receiver Document Date: 5/17/2023 Product Rev: 10...
-
Page 2: Warranty Statement
38-2000-AC WARRANTY STATEMENT BWI Eagle Inc. warrants the Air-Eagle Remote Control System, if properly used and installed, will be free from defects in material and workmanship for a period of 1 year after date of purchase. Said warranty to include the repair or replacement of defective equipment. This warranty does not cover damage due to external causes, including accident, problems with electrical power, usage not in accordance with product instructions, misuse, neglect, alteration, repair, improper installation, or improper testing. -
Page 3: Installation
38-2000-AC INTRODUCTION The Air-Eagle SR Plus is an RF system designed for short to medium range wireless remote control of electrical apparatus in a variety of industrial applications. Systems can consist of any number of receivers and handheld or contact input transmitters working together to create a short to medium range radio frequency system that operates hazardous or hard-to-reach equipment from safe, convenient locations. -
Page 4: Terminal Strip Wiring
38-2000-AC TERMINAL STRIP WIRING Terminal 1 100-250 VAC Power Input Terminal 2 100-250 VAC Power Input Terminal 3 CH1 Dry Contact Input (Common) Terminal 4 CH1 Dry Contact Input Not used on this model Terminal 5 CH2 Dry Contact Input (Common) Terminal 6 CH2 Dry Contact Input Terminal 7... - Page 5 38-2000-AC RELAY & FREQUENCY SETUP The unit is shipped from the factory RELAY CONFIGURATION with SEL1 switches in the open SEL1 positions. All four relays will operate as OPEN (default) CLOSED maintained momentary and unit is receiving commands on frequency 1. Relay #1 momentary Relay #1 toggle/latch To change default settings, follow the...
-
Page 6: Controls And Indicators
38-2000-AC CONTROLS & INDICATORS Dual color LED illuminates red while unit is booting up, changes to green POWER/TX when boot-up is successful and unit is ready to operate. LED1 If this LED fails to turn green, power unit off for 15-20 seconds, then reapply power. -
Page 7: Specifications
STANDARD ANTENNA (INCLUDED) 2.4GHz TNC Portable “Rubber Duck” Antenna 49-1201 MOBILE/BASE ANTENNAS (OPTIONAL) Used to help achieve max range in non-line-of-sight and line-of-sight applications. Contact BWI Eagle for recommendations. 2.4GHz Thru-Hole/Bracket Mount Mobile Antenna 49-2201 2.4GHz Magnet Mount Mobile Antenna 49-2202 2.4GHz Omni Directional Base Antenna... - Page 8 38-2000-AC DIMENSIONS...