Checking And Lubricating The Centerstand; Checking The Front Fork - Yamaha NEO'S 4 2008 Owner's Manual

Checking and lubricating the
centerstand
1. Centerstand
The operation of the centerstand
should be checked before each ride,
and the pivots and metal-to-metal
contact surfaces should be lubricated
if necessary.
s WARNING
s
If the centerstand does not move
up and down smoothly, have a
Yamaha dealer check or repair it.
Otherwise, the centerstand could
contact the ground and distract the
operator, resulting in a possible
loss of control.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU23192
Recommended lubricant:
Lithium-soap-based grease
EWA11301

Checking the front fork

The condition and operation of the
front fork must be checked as follows
at the intervals specified in the perio-
dic maintenance and lubrication
chart.
To check the condition
1. Check the inner tubes for scrat-
To check the operation
1. Place the vehicle on a level surfa-
6-22
ches, damage and excessive oil
leakage.
ce and hold it in an upright posi-
tion. NOTICE: To avoid injury,
securely support the vehicle so
there is no danger of it falling
over.
[EWA10751]
EAU23272
6