! IMPORTANT:
The gate operator uses positive stop limits. Therefore, the limits cannot
be set electronically by this controller. The Limit Buttons on the Control Board have
been rendered inactive by the controller. Refer to page 16 for specific instructions on
how to set the limit positions for this gate operator..
"Limit Close" LED
indicates Secondary
is at the close limit.
VIKING TECHNICAL SUPPORT 1.800.908.0884
"Close Limit" LED
indicates the gate is
at the close limit.
"Limit Open" LED
indicates Secondary
is at the open limit.
LIMIT INDICATIONS
"Open Limit" LED
indicates the gate is
at the open limit.
2 3