Table of Contents
Advertisement
en
| 52 | ACS 810 | Operation
9.2
Service phases
R
Recovery phase:
Refrigerant extracted from the vehicle, cleaned and
routed into the internal refrigerant cylinder.
R
Vacuum phase:
A vacuum is generated in the vehicle air conditioner
and the system is checked for leaks.
R
Filling phase:
$
Fresh oil: Fresh oil is added to the vehicle air
conditioner.
$
Refrigerant: A certain quantity of R134a
refrigerant is added to the vehicle air
conditioner.
|
1 689 989 601
2020-12-01
9.3
Manual service
WARNING – Risk of frostbite from
escaping refrigerant
Refrigerant causes severe frostbite on the
skin.
¶
Check the service hoses for damage.
¶
Firmly connect the service quick-release
couplings to the service hoses.
¶
Wear safety goggles.
¶
Wear protective gloves.
!
The service parameters (vacuum generation time,
recharge quantity and oil type) can be found in the
owner's manual or the vehicle repair manual.
i
With the ACS 810 all service phases can be
performed manually.
i
Individual service phases are linked as standard
to other service phases as they are needed to fully
implement the individual operation selected.
i
R134a can only be added to an air conditioner
under vacuum. The vacuum phase must therefore
be implemented before filling with R134a.
i
Observe the vehicle-specific information before
altering the quantity of oil.
Robert Bosch GmbH
Advertisement
Table of Contents
