Table of Contents
Advertisement
en
| 38 | ACS 810 | Important notes
2.2
Agreement
By using the product you agree to the following
regulations:
Copyright
Software and data are the property of
Robert Bosch GmbH or its suppliers and protected
against copying by copyright laws, international
agreements and other national legal regulations.
Copying or selling of data and software or any part
thereof is impermissible and punishable; in the event
of any infringements Bosch reserves the right to
proceed with criminal prosecution and to claim for
damages.
Liability
All data in this program is based - where possible - on
manufacturer and importer details. Bosch does not
accept liability for the correctness and completeness
of software and data; liability for damage caused by
faulty software and data is ruled out. Whatever the
event, Bosch liability is restricted to the amount for
which the customer actually pays for this product.
This disclaimer of liability does not apply to damages
caused by intent or gross negligence on the part of
Bosch.
Warranty
Any use of non-approved hardware and software will
result in a modification to our product and thus to
exclusion of any liability and warranty, even if the
hardware or software has in the meantime been
removed or deleted.
No changes may be made to our products. Our
products may only be used in combination with original
accessories and original service parts. Failing to do so,
will render null and void all warranty claims.
This product may only be operated using Bosch
approved operating systems. If the product is operated
using an operating system other than the approved
one, then our warranty obligation pursuant to our
supply conditions will be rendered null and void.
Furthermore, we will not be held liable for damage
and consequential damage incurred through the use of
a non-approved operating system.
|
1 689 989 601
2020-12-01
2.3
Obligation of workshop operator
The workshop operator is obliged to ensure that all
measures geared towards the prevention of accidents,
industrial diseases, labor-related health risks are taken
and measures towards making the workplace fit for
people to work in are carried out.
Electrical engineering in Germany is subject to
the accident prevention regulations of the trade
association "Electrical Plant and Equipment as under
DGUV Vorschrift 3 (previously BGV A3)". In all other
countries, the applicable national regulations acts or
decrees are to be adhered to.
Basic rules
The workshop operator is bound to ensure that all
electrical equipment and operating material is set up,
modified and maintained by skilled electricians only
or under the guidance and supervision of a skilled
electrician in accordance with electrical engineering
principles.
Furthermore, the workshop operator must ensure
that all electrical equipment and operating material
is operated in keeping with electrical engineering
principles.
If a piece of electrical equipment or operating
material is found to be defective, i.e. it does not
or no longer complies with electrical engineering
principles, the workshop operator must ensure that
the fault is rectified immediately and, in the event that
imminent danger exists, also ensure that the electrical
equipment or the electrical operating material is not
used.
Tests (taking Germany as an example):
R
The workshop operator must ensure that all
electrical systems and equipment are tested by
a qualified electrician or under the guidance of a
qualified electrician to ensure they are in proper
working order:
$
Before starting for the first time.
$
After modification or repair before starting for
the first time.
$
At given intervals. Set intervals such as to
ensure that faults that can be expected to occur
are determined in good time.
R
The test is to take the electrical engineering
principles relating hereto into account.
R
Upon request of the trade association, a test
manual is to be maintained into which specific
entries are made.
Robert Bosch GmbH
Advertisement
Table of Contents
