Table of Contents
Advertisement
Figure 23
Important:
Make sure that the fuel-shutoff valve
is closed before transporting or storing the
machine, as fuel leakage may occur. Engage the
parking brake before transporting. Make sure that
you remove the key as the fuel pump may run and
cause the battery to lose charge.
All manuals and user guides at all-guides.com
Using the Motion-Control
Levers
g027337
Driving the Machine
The drive wheels turn independently, powered by
hydraulic motors on each axle. You can turn 1 side
in reverse while you turn the other forward, causing
the machine to spin rather than turn. This greatly
improves the machine maneuverability but may
require sometime for you to adapt to how it moves.
The throttle control regulates the engine speed as
measured in rpm (revolutions per minute). Place
the throttle control in the F
performance. Always operate in the full throttle
position when mowing.
27
Figure 24
1. Motion-control
lever—N
-
EUTRAL
LOCK
position
2. Center, unlocked position
3. Forward
4. Backward
5. Front of machine
position for best
AST
g004532
Advertisement
Table of Contents
