Figure 99
1. Clutch pulley
2. Mower belt
3. Spring-loaded idler pulley
4. Ratchet
7.
Remove and retain the hardware on both sides
of the deck as shown in
Figure 100
1. Right stabilizer
2. Deck strut (right side shown)
3. Remove the shoulder bolt and nut.
4. Remove the shoulder bolt and nut.
All manuals and user guides at all-guides.com
g009038
5. Square hole in the idler
arm for the ratchet
6. Idler grease fitting
7. Belt guide
Figure
100.
g010252
8.
Raise the deck struts and secure them in the
raised position.
9.
Slide the deck out to the right side of the
machine.
73