Servicing The Engine Oil - Toro Z Maser Professional 5000 Series Operator's Manual

Table of Contents

Advertisement

Note:
Ensure that the primary filter is fully
seated by pushing on the outer rim while
installing it.
Important:
Do not press on the soft, inside
area of the filter.
4.
Install the air-cleaner cover and secure the
latches
(Figure
46).
All manuals and user guides at all-guides.com

Servicing the Engine Oil

Oil Type: Detergent oil (API service SJ or higher)
Oil Capacity: with a filter change—1.65 L (56 oz);
without a filter change—1.50 L (51 oz)
Viscosity: See the table below.
Note:
rating is acceptable, up to 4°C (40°F).
Note:
cold below -23°C (-10°F).
Checking the Engine-Oil Level
Service Interval: Before each use or daily
Note:
Contact with hot surfaces may cause personal
injury.
Keep hands, feet, face, clothing, and other
body parts away from the muffler and other
hot surfaces.
Important:
because damage to the engine may result. Do not
run engine with oil below the Low mark because
the engine may be damaged.
43
Figure 47
Use of synthetic oil having 5W-20 or 5W-30
Synthetic oils provide better starting in extreme
Check the oil when the engine is cold.
WARNING
Do not overfill the crankcase with oil
1.
Disengage the PTO, move the motion-control
levers to the N
EUTRAL
engage the parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position
-L
position, and
OCK
(Figure
48).
g012991

Advertisement

Table of Contents
loading

This manual is also suitable for:

7493374934

Table of Contents