Toro Z Maser Professional 5000 Series Operator's Manual page 10

1. IMPORTANT: Use only replacement tank(s) that are free of
dents or damage. Match size and type required on tank
specification decal.
2. Stop the machine on a level surface, disengage the PTO,
and engage the parking brake.
3. Close the fuel valve(s) on the tanks by rotating them
clockwise; continue to run the engine.
4. When the engine shuts off, remove the key.
5. Disconnect the LPG fuel hose(s).
6. Unlatch the cylinder bracket(s).
All manuals and user guides at all-guides.com
126-3277
7. Remove the empty tank(s). Check the valve and fittings for
8. Install full replacement tank(s) by aligning the center hole on
9. Latch the bracket(s) and ensure that the tank(s) is securely
10. Connect the fuel hose(s).
11. Slowly open the fuel valve(s) counterclockwise to equalize
126-4553
10
debris or damaged O-rings.
the tank collar over the mounting tab/index pin.
fastened to the mower.
the pressure. Check for leaks.
decal126-3277
decal126-4553