Table of Contents
Advertisement
Storage
Cleaning and Storing the
Machine
1.
Disengage the power takeoff (blade-control
switch (PTO), engage the parking brake, and
turn the ignition key to the
the key.
2.
Remove grass clippings, dirt, and grime from the
external parts of the entire machine, especially
the engine and hydraulic system. Clean dirt and
chaff from the outside of the engine cylinder
head fins and blower housing.
Important:
You can wash the machine
with mild detergent and water. Do not
pressure-wash the machine. Avoid
excessive use of water, especially near the
control panel, engine, hydraulic pumps, and
motors.
3.
Check the brake; refer to
(page
59).
4.
Service the air cleaner; refer to
Cleaner (page
41).
5.
Grease the machine; refer to
39).
6.
Change the crankcase oil; refer to
Engine Oil (page
7.
Check the tire pressure; refer to
Tire Pressure (page
8.
Change the hydraulic filters; refer to
the Hydraulic Fluid and Filters (page
9.
Charge the battery; refer to
(page
51).
10.
Scrape any heavy buildup of grass and dirt
from the underside of the mower, then wash the
mower with a garden hose.
Note:
Run the machine with the blade-control
switch (PTO) engaged and the engine at high
idle for 2 to 5 minutes after washing.
11.
Check the condition of the blades; refer to
Servicing the Cutting Blades (page
12.
Check and tighten all bolts, nuts, and screws.
Repair or replace any part that is damaged.
13.
Paint all scratched or bare metal surfaces. Paint
is available from your Authorized Service Dealer.
14.
Store the machine in a clean, dry garage or
storage area.
15.
Remove the key from the ignition switch
and keep it out of reach of children or other
unauthorized users.
All manuals and user guides at all-guides.com
position. Remove
OFF
Brake Maintenance
Servicing the Air
Lubrication (page
Changing the
44).
Checking the
54).
Replacing
65).
Charging the Battery
69).
16.
Cover the machine to protect it and keep it clean.
75
Advertisement
Table of Contents
