Page 4
ALCOHOL STILLER MANUAL 10L/30L/50L/70L NEED HELP? CONTACT US! to contact us: This is the original instruction,Please read all manual instructions carefully before operating. arance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there is any technology or software updates on our product.
The user just needs to pour a suitable height level of water and link the pump with the outlet water pipe and then connect the pump with power supply in accordance with the mark on the label. Thus, the pump can run well. Technical data Model JYC-1100 Rating voltage 110-120V~ 220-240V~ Rating Frequency 60Hz...
Always use the transformer provided to run the water pump or consult with • your electrician before other transformer is connected Do not connect the transformer provided to other appliance. • Always unplug the power transformer from the electrical outlet before any •...
Page 7
This user manual applies to the distiller series products. Please read this manual carefully before using the product. Item Picture Condenser Keg 1pcs 1pcs Boiler Barrel 1pcs Stainless Steel Steam Grid 1pcs Silicone Gasket 1pcs Exhaust Valve 1pcs...
Page 8
Ball Valve 1pcs Thermometer 1pcs Thermometer 1pcs Alcohol Meter 1pcs Water Inlet Pipe 1pcs Water Outlet Pipe 1pcs...
Page 9
Measuring Cup 1pcs Long Measuring Cup 1pcs Silicone Gasket 1pcs Wine Pipe 1pcs Gauze 1pcs Slag Separation Bag 1pcs User Manual 1pcs Water Pump 1pcs...
Product Introduction • Stainless steel fermenters concentrate steam by heating to boiling and then cooling. In addition, the entire alcohol distillation unit is made of 304 food-grade stainless steel, which is durable and easy to clean. stainless steel spiral tube, which has At the same time, it has a large contact area with the condenser keg and provides a relatively low distillation temperature.
mly with the bucket iron clip. Adjust the position of the condenser keg on the barrel cover, and the conn cket cover iron clip, install the ball valve, the one-way exhaust valve and the thermometer, and tightly connect the condensing tower and the wine outlet pipe, and then install the water inlet pipe and the water outlet pipe in sequence.
Page 12
Equipment Cleaning and Maintenance 1. The exhaust gas channel can discharge graded impurities and improve the quality of wine. For example, for methanol, acetaldehyde, ethyl acetate, ethyl formate, etc., they all have lower boiling and will be discharged upward with the 2.
Page 13
Pipe Connection Diagram for Tap Water can be controlled. The temperature of ensure that is close to the cooling water temperature. Pipe Connection Diagram for Circulating Water via a Water Pump When using circulating water, if the water temperature exceeds 35°C, it is recommended to change the water.
How to Use Distill Liquor 1. Choose good common rice for steaming, add the steamed rice in the ratio of 500g grain, 1kg water ntation. 2. Fermentation temperature of 20-25 ℃, stirring once a day, fermentation 10-20 days. r the liquid produced during the fermentation process directly into the barrel.
Need help?
Do you have a question about the JYC-1100 and is the answer not in the manual?
Questions and answers