Bosch HSG958D 1A Series User Manual And Installation Instructions page 19

Combi steam oven
Table of Contents

Advertisement

Press the temperature.
1.
Change the temperature with the setting ring.
2.
a The change is applied.
Changing the cooking time
You can change the cooking time at any time.
Press the cooking time
1.
Use the setting ring to change the cooking time.
2.
a The change is applied.
11.4 Setting added steam
Requirements
¡ Observe the information about the respective operat-
ing mode.
→ "Setting options with steam", Page 17
¡ The water tank has been filled. If the water tank runs
dry during operation, a message appears on the dis-
play. The appliance continues to operate but without
injecting steam into the cooking compartment.
→ "Filling the water tank", Page 17
Press the operating mode that you require in the
1.
menu.
2.
Select the settings for the operating mode, e.g. type
of heating and temperature.
Press
⁠   "Added steam".
3.
Use the setting ring to set the steam level.
4.
Steam level
1
2
3
Press
to start the operation.
5.
a The appliance starts heating.
a The setting values and how long the appliance has
already been in operation are shown on the display.
When the food is ready, use
6.
ance off.
Empty the water tank and dry the cooking compart-
7.
ment.
→ "After using steam operation", Page 19
Changing added steam
You can change or deactivate the added steam func-
tion at any time.
Press added steam
1.
Change or deactivate added steam using the setting
2.
ring.
a The change is applied.
11.5 Setting the steam jet function
Requirements
¡ Observe the information about the respective operat-
ing mode.
→ "Setting options with steam", Page 17
¡ The water tank has been filled. If the water tank runs
dry during operation, a message appears on the dis-
play. Operation is stopped.
→ "Filling the water tank", Page 17
Press the operating mode that you require in the
1.
menu.
Select the settings for the operating mode, e.g. type
2.
of heating and temperature.
⁠ .
Added steam
Low
Medium
High
to switch the appli-
⁠ .
Press
to start the operation.
3.
Press
"Steam jet" at the desired time.
4.
Do not use the steam jet until the appliance has
completely heated up.
5.
Press "On" in the setting ring.
a The appliance starts to heat the water.
When the water is heated up, press
6.
again.
Note: If rapid heating
can only be triggered once rapid heating is com-
plete.
a The steam jet is triggered and the appliance adds
clouds of steam to the cooking compartment for ap-
prox. 3 to 5 minutes.
a When the steam jet has finished, the operation con-
tinues to run as normal. Depending on the opera-
tion, the steam jet can be triggered again if neces-
sary.
When the food is ready, use
7.
ance off.
Empty the water tank and dry the cooking compart-
8.
ment.
→ "After using steam operation", Page 19
Cancelling the steam jet
You can cancel the steam jet at any time.
Press
⁠   "Steam jet".
1.
Press "Off" in the setting ring.
2.
a The operation continues without the steam jet.
11.6 After using steam operation
Dry the appliance after each steam operation.
Note: Traces of limescale may remain in the cooking
compartment after operation with steam. The functional-
ity of the appliance is not affected by this. You can re-
move traces of limescale using hot water or a cloth
soaked in vinegar. Observe the information on clean-
ing.
→ "Cleaning and servicing", Page 28
Emptying the water tank
WARNING ‒ Risk of burns!
The water tank may heat up while the appliance is in
operation.
Wait until the water tank has cooled down from the
previous operation.
Remove the water tank from the tank recess.
ATTENTION!
Drying the water tank in the hot cooking compartment
leads to damage to the water tank.
Do not dry the water tank in the hot cooking com-
partment.
Cleaning the water tank in the dishwasher will damage
it.
Do not clean the water tank in the dishwasher.
Clean the water tank with a soft cloth and standard
washing-up liquid.
Use
to open the control panel.
1.
2.
Remove the water tank.
Carefully remove the lid of the water tank.
3.
Empty the water tank, clean it with detergent and
4.
then rinse it thoroughly with clean water.
Dry all parts with a soft cloth.
5.
Steam en
"Steam jet"
is activated, the steam jet
to switch the appli-
19

Advertisement

Table of Contents
loading

Table of Contents