Application Advice; Maintenance & Service; Noise / Vibration - Skil 9019 Original Instructions Manual

head, in order to prevent the tool from being pushed out
of the cut in an uncontrolled manner
- do not apply pressure on the tool; let the speed of the
cutting disc do the work
- the working speed of the cutting disc depends on the
material to be cut
- do not brake cutting discs with side pressure
• Holding and guiding the tool
- always hold the tool firmly with both hands, so you will
have full control of the tool at all times
! while working, always hold the tool at the grey-
coloured grip area(s) e
- provide for a secure stance
- pay attention to the direction of rotation; always hold the
tool so, that sparks and grinding/cutting dust fly away
from the body
- keep ventilation slots L 6 uncovered

APPLICATION ADVICE

• Instead of flange B 6 the "CLIC" quick-clamping flange
(SKIL accessory 2610388766) can be used; grinding/
cutting discs can then be mounted without the use of
accessory keys
• For more tips see www.skil.com
MAINTENANCE / SERVICE
• This tool is not intended for professional use
• Always keep tool and cord clean (especially ventilation
slots L 6 )
! do not attempt to clean ventilation slots by
inserting pointed objects through openings
! disconnect the plug before cleaning
• If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for SKIL
power tools
- send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of the
tool are listed on www.skil.com)
• Be aware that damage due to overload or improper
handling of the product will be excluded from the
warranty (for the SKIL warranty conditions see
www.skil.com or ask your dealer)
ENVIRONMENT
• Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
- in observance of European Directive 2012/19/EC
on waste of electric and electronic equipment and
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol 5 will remind you of this when the need for
disposing occurs

NOISE / VIBRATION

• 9019/9020
Measured in accordance with EN 60745 the sound
pressure level of this tool is 90.0 dB(A) and the sound
power level 101.0 dB(A) (standard deviation: 3 dB), and
the vibration when surface grinding 5.4 m/s² (triax vector
sum; uncertainty K = 1.5 m/s²)
! other applications (such as cutting-off) may have
different vibration values
• 9021
Measured in accordance with EN 60745 the sound
pressure level of this tool is 89.5 dB(A) and the sound
power level 100.5 dB(A) (standard deviation: 3 dB), and
the vibration when surface grinding 9.5 m/s² (triax vector
sum; uncertainty K = 1.5 m/s²)
! other applications (such as cutting-off) may have
different vibration values
• The vibration emission level has been measured in
accordance with a standardised test given in EN 60745;
it may be used to compare one tool with another and as
a preliminary assessment of exposure to vibration when
using the tool for the applications mentioned
- using the tool for different applications, or with different
or poorly maintained accessories, may significantly
increase the exposure level
- the times when the tool is switched off or when it is
running but not actually doing the job, may significantly
reduce the exposure level
! protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
b
Meuleuse d'angle
INTRODUCTION
Cet outil sert au meulage, au tronçonnage et à
•
l'ébarbage léger de pièces en métal et en pierre sans
utiliser de l'eau
• Cet outil n'est pas conçu pour un usage professionnel
• Ne jamais appliquez une trop forte pression sur
l'outil; laissez au disque le soin de faire le travail de
par sa propre vitesse
• Les opérations de coupe avec disques à tronçonner
abrasifs ne sont autorisées que si une protection
de tronçonnage (disponible en option comme
accessoire SKIL 2610S01145 (9019/9020) /
2610S01146 (9021)) est utilisée
• Lisez et conservez ce manuel d'instruction 2
CARACTERISTIQUES TECHNIQUES 1
ELEMENTS DE L'OUTIL 2
Arbre
A
B Bride de serrage
C Clé
Bouton de blocage de l'arbre
D
E Poignée auxiliaire
F Protège-main
G Vis du protège-main
H Clé hexagonale
J Bride de montage
K Interrupteur marche/arrêt de verrouillage
Fentes de ventilation
L
11
9019/9020/9021