Table of Contents
Advertisement
en Programme
ATTENTION!
Otherwise the meat probe may be damaged.
Do not trap the cable of the meat probe.
▶
To prevent the meat probe from being damaged by
▶
excessive heat, there must be a gap of a few centi-
metres between the grill element and the meat
probe. The meat may expand during the cooking
process.
Insert the meat thermometer at an angle into the
1.
thickest part of the meat.
Ensure that the tip of the meat thermometer is
correctly positioned in the meat:
– The tip must be roughly in the middle of the
food.
– The tip must not be inserted in the fat.
– The tip must not touch any cookware or bones.
Place the food with the meat thermometer into the
2.
cooking compartment.
It is best to place the food in cookware into the
centre of the wire rack.
Plug the meat thermometer into the socket on the
3.
left-hand side of the cooking compartment.
Notes
¡ If you remove the meat thermometer while the food
is cooking, all the settings will be reset.
¡ Do not remove the meat thermometer when turning
the food. Once you have turned the food, check that
the meat thermometer is correctly positioned in the
food.
10.3 Setting the meat thermometer
The meat probe measures the temperature inside the
food between 30 °C and 99 °C.
Requirements
¡ The food with the meat probe is in the cooking com-
partment.
¡ The meat probe is plugged in inside the cooking
compartment.
11 Programme
The programmes help you to use your appliance to
prepare different dishes by selecting the optimum set-
tings automatically.
11.1 Cookware for programmes
You should therefore use heat-resistant cookware that
is suitable for temperatures up to 300 °C.
Glass or glass ceramic cookware is best. The joint
should cover approx. two thirds of the cookware base.
Cookware made from the following material is not
suitable:
¡ Bright, shiny aluminium
16
Use the function selector to set a suitable type of
1.
heating.
lights up in the display and the core temperature
a
display appears next to the temperature of the cook-
ing compartment.
Use the
or button to set the core temperature.
2.
Use the temperature selector to set the temperature
3.
of the cooking compartment.
Set the cooking compartment temperature at least
10 °C higher than the core temperature.
Do not set the cooking compartment temperature to
higher than 250 °C.
a The appliance starts heating after a few seconds.
a The current core temperature of the food is shown
on the left, while the set core temperature is shown
on the right, e.g. 15 °C|75 °C. The current core
temperature only appears once it reaches 10 °C.
a Once the food reaches the core temperature, an
audible signal sounds and, in the display, the cur-
rent core temperature is equal to the set core tem-
perature, e.g. 75 °C|75 °C.
4.
WARNING ‒ Risk of burns!
The cooking compartment, accessories and meat
probe become very hot.
Always use oven gloves to remove hot accessor-
▶
ies and the meat probe from the cooking com-
partment.
When the core temperature is reached:
Switch off the appliance.
‒
Pull the meat probe out of the socket in the
‒
cooking compartment.
Pull the meat probe out of the food remove it
‒
from the cooking compartment.
¡ Unglazed clay
¡ Plastic or plastic handles
11.2 Steam
For the steam function, the appliance provides you with
programmes that allow you to prepare food easily and
professionally.
Information about the steam functions can be found un-
der Steam.
→ "Steam", Page 12
Advertisement
Table of Contents
