Table of Contents
Advertisement
19.3 Removing the pull-out rail
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
▶
Always allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
Notes
¡ Depending on the appliance type, you must change
the basic settings for the telescopic rails for appli-
ances with rails and pull-out rails.
→ "Basic settings", Page 21
¡ If necessary, you can use pull-out rails on all levels.
Push on the tab marked PUSH behind the rail, and
1.
push the rail to the rear.
2.
Keep the PUSH tab pushed back
rail outwards
.
Pull the rail out towards the front until the retainer at
3.
the back unhooks.
4.
5.
19.4 Attaching the pull-out rail
Note: The pull-out rails only fit on the right or left. Make
sure when you fit them that you can pull them out to-
wards the front.
1.
and swing the
2.
Remove the pull-out rail.
Clean the pull-out rail.
→ "Cleaning products", Page 22
Insert the pull-out rail between the two bars.
Push the retainer
in between the lower and the
upper bar.
Shelf supports en
27
Advertisement
Table of Contents
