Table of Contents
Advertisement
Film Tag INFO
The Film Tag INFO menu displays information about the film currently loaded in the Laminator.
. Film information is retrieved when the Laminator is turned on or when Reload TAG INFO is
performed. Inaccurate film information may display if the film was replaced and Reload TAG INFO
was not performed.
The below information can be found in this menu.ID ... Identifies the type of film installed in the
Laminator. See the below table for information about each ID.
Capacity ... The number of prints per film roll.
Remainder ... Percentage of prints remaining on the film roll.
st
1
Side Speed ... The recommended 1
nd
2
Side Speed ... The recommended 2
Both Side TEMP ... The recommended lamination temperature for the loaded film.
8
st
side lamination speed for the loaded film.
nd
side lamination speed for the loaded film.
IX-R7000 Card Lamination Module Configuration Guide
Advertisement
Table of Contents
