Factory Default Settings - Motorola CLP446e User Manual

Hide thumbs Also See for CLP446e:

Table of Contents

Available languages

MN006181A01-AC

Chapter 4 : Radio Programming through CPS

Figure 11: Programming the Radio through a Multi-Unit Charger

2 Set the cable switch to analog.

3 After the radio is connected, open the CPS and select Read on the toolbar to get the radio

You can change the general, audio, menu, channels, scan list, customized PL/DPL settings and

select frequencies and PL/DPL codes on each channel.

4 To save the settings, select Write to radio on the toolbar.

NOTE: For more information on the CPS, see Help menu in the CPS.

Factory Default Settings

Your radio is programmed at the factory to the following settings.

Table 8: CLP446e Defaults

Channel Number

Frequency Settings

Code Value (Hz)

Bandwidth (kHz)

Table of Contents

Clpe plus Clpe