ABB UNO-DM-3.3-TL-PLUS Product Manual page 70

5 - Installation
3. MULTICONTACT MC4 quick-fit connectors
Installation of Multicontact MC4 connectors requires crimping to be car-
ried out with suitable equipment.
- Strip the cable to which you want to apply the connector (after verifying
that it complies with the connector limits).
4...6mm 2
- Apply the terminal to the conductor using the designated pliers.
5.5...9mm
Multi-Contact
32.6020-19100
- Insert the cable with the terminal into the connector, until you hear the
click indicating that the terminal is locked inside the connector.
Click
- Firmly tighten the cable gland using the relevant tool to finish the oper-
ation.
Multi-Contact
32.6024
2.5 Nm
- 70 -