ABB UNO-DM-3.3-TL-PLUS Product Manual page 140

(*) Available for the Italian country
standard only. Refer to the section
on this topic in the manual.
Settings
Selecting Settings brings up the first screen relating to the password.
The default password is "0000".
This can be changed by using the display buttons, following the same
procedure as always:
• ENTER scrolls through the digits (from left to right)
• ESC returns to the previous digit (from right to left)
• Press ESC several times to return to the previous menus
• DOWN scrolls down the numerical scale (from 9 to 0)
• UP scrolls up the numerical scale (from 0 to 9)
After entering the password, press ENTER to access the information in
this section:
Settings
ENTER
Password 0000
ENTER
- 140 -
1
Vstart
DOWN UP
2
Input Mode
DOWN UP
3
Input UV Delay
DOWN UP
4
Service
DOWN UP
5
Remote ON/OFF
DOWN UP
6
MPPT Scan
DOWN UP
7
Power Limit.
DOWN UP
8
Reactive Power
DOWN UP
9*
Autotest
DOWN UP
10
Alarms
7 - Operation