ABB UNO-DM-3.3-TL-PLUS Product Manual page 69

4...6mm 2
6...7mm
2. WEIDMÜLLER WM4 quick-fit connectors
Installation of Weidmüller WM4 connectors requires crimping to be car-
ried out with suitable equipment.
- Strip the cable to which you want to apply the connector (after verifying
that it complies with the connector limits).
- Apply the terminal to the conductor using the designated pliers.
Weidmüller
CTF PV WM4
(1222870000)
- Insert the cable with the terminal into the connector, until you hear the
click indicating that the terminal is locked inside the connector.
- Firmly tighten the cable gland using the relevant tool to finish the oper-
ation.
2.0÷2.5 Nm
- 69 -
5 - Installation
Click
WEIDMÜLLER
SET MULTI-TOOL PV
(1217280000)