ABB UNO-DM-3.3-TL-PLUS Product Manual page 119

In case of "Station Mode" selection it's required to enter the wireless
network parameters (set on the router) and follow the subsequent pro-
cedure:
- IP Selection Mode: DHCP or Static:
If you select the DHCP function (default setup) the rou-
ter will automatically assign a dynamic IP address to the
inverter whenever it tries to connect to the user network.
With Static, the user can assign a fixed IP address to
the system. The data which has to be entered in order
for IP static address assigning to take place will appear.
Complete the additional fields at the bottom of the screen
(all the fields are mandatory with the exception of the
secondary DNS server).
- SSID (name of wireless network):
Identify and select your own (home) wireless net-
work from all those shown in the SSID field (you
can carry out a new search of the networks that
can be detected with the Update button
Once the network has been selected, confirm.
- Password (wireless network password):
Enter the password for the destination network (if neces-
sary) and start the connection attempt (it will take a few
seconds).
Click on "Connect" button to switch the inverter wireless
connection from point to point to the home wireless net-
work.
- 119 -
7 - Operation
).