Advertisement
RTV 900 Soft Top Installation (continued)
1
3
1.
2
4
4
If you currently have a Seizmik windshield, remove the
top (2) black plastic windshield clamps.
2.
Fasten the (3) tension straps on the top of the ROPS
as shown. These straps prevent the roof from
sagging
3.
Lay the soft top over the roll cage of the vehicle
making sure the straps are on the outside of the
ROPS.
Rear
4.
Reinstall the (2) windshield clamps in the slots of the (2)
front straps as shown.
Tip – A good way to
tighten is to push
the connected
strap away from
you and pull the
loose strap toward
you at the same
time.
Front
Advertisement
