Install Appliance - Gaggenau VL 414 712 Installation Instructions Manual

7.
After installing, check that all plug connections fit
correctly.
8.
After installing all the cables, secure them to the
retaining plate by bending the tab down (E).

Install Appliance

9
WARNING
Before you plug in an electrical cord or turn on
power supply, make sure all controls are in the OFF
position.
Note: Observe the installation sequence. First fit the
downdraft ventilation in the cut-out on the worktop. Then
install the other appliances.
1.
Use four nuts to screw the exhaust-air elbow tightly to
the appliance.
2.
Insert the downdraft ventilation into the cut-out on the
worktop.
Installation Procedure
en-us
11