ICON PFEL03815.7 User Manual page 9

5. Tip: Avoid pinching the wires. Insert the
Upright (2) into the Frame (1).
Attach the Upright (2) with six M10 x 20mm
Screws (76); start all the Screws, and then
tighten them.
Then, connect the Upper Wire (94) to the Main
Wire (96).
6. Locate the wire tie (D) in the top of the Upright
(2) and pull the Upper Wire (94) out of the
Upright. Then, untie and discard the wire tie.
Tip: Avoid pinching the wires. Orient the
Wire Cover (20) so that the tab (E) is in
the location shown. Attach the Wire Cover
to the Frame (1) and the Upright (2) with two
M4 x 16mm Screws (115).
5
76
76
1
96
6
2
1
20
115
9
2
94
Avoid pinching
76
the wires
94
D
E
Avoid pinching
the wires