Save & Exit - Supermicro 6028R-E1CR12N User Manual

S S S
UPER TORAGE YSTEM 6028R-E1CR12N User's Manual
•
Dual Boot Order #7
•
Dual Boot Order #8
•
Dual Boot Order #9
•
Dual Boot Order #10
•
Dual Boot Order #11
•
Dual Boot Order #12
•
Dual Boot Order #13
•
Dual Boot Order #14
•
Dual Boot Order #15
 Delete Boot Option
Use this item to select a boot device to delete from the boot priority list.
Delete Boot Option
Select the target boot device to delete.
 Hard Disk Drive BBS Priorities
•
Legacy Boot Order #1
 Network Drive BBS Priorities
•
Legacy Boot Order #1
 UEFI Application Boot Priorities
•
UEFI Boot Order #1
7-40
7-8 Save & Exit
Select the Save & Exit tab from the BIOS setup screen to configure the settings
below.
Discard Changes and Exit
Select this option to quit the BIOS setup without making any permanent changes
to the system configuration, and reboot the computer. Select Discard Changes and
Exit from the Exit menu and press <Enter>.
Save Changes and Reset
When you have completed the system configuration changes, select this option to
leave the BIOS setup utility and reboot the computer for the new system configura-
tion parameters to take effect. Select Save Changes and Exit from the Exit menu
and press <Enter>.
Save Options
Save Changes
When you have completed the system configuration changes, select this option to
save all changes made. This will not reset (reboot) the system.
Discard Changes
Select this option and press <Enter> to discard all the changes and return to the
AMI BIOS setup utility.
Restore Defaults
Select this item and press <Enter> to load the manufacture default settings which
are designed for maximum system performance but not for maximum stability.
Chapter 7: BIOS
7-41