5-10 Onboard Indicators - Supermicro 6028R-E1CR12N User Manual

S S S
UPER TORAGE YSTEM 6028R-E1CR12N User's Manual
Watch Dog Enable/Disable
Jumper JWD controls the Watch
Dog function. Watch Dog is a sys-
tem monitor that can reboot the
system when a software application
hangs. Jumping pins 1-2 will cause
WD to reset the system if an appli-
cation hangs. Jumping pins 2-3 will
generate a non-maskable interrupt
signal for the application that hangs.
See the table on the right for jumper
settings. Watch Dog must also be
enabled in BIOS.
Note: When enabled, the user
needs to write their own applica-
tion software in order to disable the
Watch Dog Timer.
Watch Dog
Jumper Settings
Jumper Setting Definition
Pins 1-2 Reset
Pins 2-3 NMI
Open Disabled
5-24

5-10 Onboard Indicators

LAN LEDs
The Ethernet ports (located beside the
VGA port) have two LEDs. On each
port, the orange LED flashes to indi-
cate activity while the other LED may
be green, amber or off to indicate the
speed of the connection. See the table
on the right for the functions associ-
ated with the connection speed LED.
Dedicated IPMI LAN LEDs
A dedicated IPMI LAN is also located
on the I/O backplane. The amber LED
on the right indicates activity, while
the green LED on the left indicates
the speed of the connection. See the
table at right for more information.
Onboard Power LED (LE1)
An Onboard Power LED is located at
LE2. This LED Indicator is lit when
the system is on. Be sure to unplug
the power cable before removing or
adding any components. See the table
on the right for more details.
BMC Heartbeat LED
A BMC Heartbeat LED is located at
LEDM1 on the serverboard. When
blinking, BMC is functioning normally.
Chapter 5: Advanced Serverboard Setup
LAN1/2 LED
(Connection Speed Indicator)
LED Color Definition
Off No link, 10 or 100 Mbps
Green 10 Gbps
Amber 1 Gbps
IPMI LAN Link LED (Left) &
Activity LED (Right)
Color/State Definition
Link (Left) Green: Solid 100 Mbps
Amber: Solid 1 Gbps
Activity (Right) Orange: Active
Blinking
Onboard PWR LED Indicator
LED States
Color/State Definition
Off System Power Off
Green: On System Power On
BMC Heartbeat LED
States
Color/State Definition
Green: Blinking BMC Normal
5-25