Table of Contents
Advertisement
Freestanding Installation
Fitting between existing cabinets
1
The height of the dishwasher, 845mm, has been designed in order to allow
the machine to be fitted between existing cabinets of the same height in
modern fitted kitchens. The feet can be adjusted so that correct height is
reached. The laminated top of the machine does not require any particular
care since it is heatproof, scratch proof and stain proof.
Fitting beneath / underneath an existing benchtop
2
In most modern fitted kitchens there is only one single work top under which
cabinet and electrical appliances are fitted. In this case remove the work top
of the dishwasher by unscrewing the screws under the rear edge of the top, a.
Warning!
After removing the work top, the screws must
be screwed again under the rear edge of the top, b.
The height will then be reduced to 815mm, as scheduled by the International
ISO
Regulations
1
INSTALLATION
and the dishwasher will fit perfectly under the kitchen working top.
2
13
Advertisement
Table of Contents
