Table of Contents
Advertisement
Installation
Positioning the Appliance
Position the appliance in the desired location. The dishwasher is equipped with water supply and drain
hoses that can be positioned to the right or left to allow correct installation.
Levelling the Appliance
Once the appliance is positioned, adjust the feet by screwing them in or out. The appliance should not be
inclined more than 2 degrees, to ensure proper performance.
Cold Water Connection
Connect the cold water supply hose to a threaded 3/4 bsp connector and make sure that it is fastened tightly
(see fig.1).
If the water pipes are new or have not been used for an extended period of time, let the water run first, till it
is clear and free of impurities. Otherwise the water inlet filter may get blocked.
Hot Water Connection
The appliance can also be connected to the house's hot water supply following the same procedure as for
the cold water connection.
DO NOT CONNECT TO A PUSH THROUGH HOT WATER
SYSTEM OR ONE THAT EXCEEDS A TEMPERATURE OF
60
C.
O
13
fig.1
Advertisement
Table of Contents
