Table of Contents
Advertisement
Problem
Possible cause
Cloudiness
Combination of soft water
on glassware
and too much detergent
Black or
Aluminium utensils have
grey marks
rubbed against dishes
on dishes
Detergent left
Dishes block detergent dispenser
in dispenser
The dishes
Improper loading
aren't drying
Too little rinse-aid
Dishes are removed too soon
Wrong program has been selected
Use of cutlery with
a low-quality coating
TROUBLE SHOOTING
39
Solution
Use less detergent if you have
soft water and select a shorter
cycle to wash the glassware
and to get them clean
Use a mild abrasive cleaner
to eliminate those marks
Re-loading the dishes properly
Load the dishwasher as
suggested in the directions
Increase the amount of rinse-aid/
refill the rinse-aid dispenser
Do not empty your dishwasher
immediately after washing. Open
the door slightly so that the steam
can come out. Take out the dishes
until the inside temperature is safe
to touch. Unload the lower basket
first to prevent the dropping water
from the upper basket
With a short program,
the washing temperature
is lower, decreasing cleaning
performance. Choose a program
with a long washing time
Water drainage is more difficult
with these items. Cutlery or dishes
of this type are not suitable for
washing in the dishwasher
Advertisement
Table of Contents
