Chipolino MAX SAFE Instruction Manual page 8

Use of child restraint system
Table of Contents

Advertisement

c
4. Tie both shoulder belts (c) and store them in the department behind the backrest cover (d),
and central buckle (7) – in the department under the fabric cover (e).
6. ISOFIX ATTACHMENTS ADJUSTMENT
21
15
7. SUPPORT LEG
IMPORTANT! Support leg can be used for children with height 40-105 cm.
17
1. Open the support leg 17
(under the cover of the base)
and rotate it at 90° according to
base.
By height of the child from 105-150 cm, you must store the support leg under the base.
To do this, follow the above described actions in opposite order.
d
Position Longest
attachments
16
Position Shortest
attachments
2. Press and hold the button for
releasing the support leg (13).
Pull the support leg out until you
reach correct position.
e
7
• Install the guides of ISOFIX attachments (21) to
the corresponding places in vehicle;
• Press
ISOFIX
attachments (16) and pull them maximum out
(position „longest attachments").
• Install ISOFIX attachments (15) to the guides
(21), until you hear a click sound and ISOFIX
indicator shows
completed.
• Press the red button again (16), to release the
attachments (15) from the guides (21).
After ISOFIX attachment (21) installation, press the
car seat firmly against the vehicle seat.
13
3. Press and hold the button for
height adjustment of support leg
and move it up or down until it
reaches the floor of the vehicle.
Indicator must show
color.
7
button
to
release
GREEN
color.
Installation is
Height of support leg
ISOFIX
GREEN

Advertisement

Table of Contents
loading

Table of Contents